Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
#1 Posted : Tuesday, August 14, 2018 10:20:13 AM(UTC)

Rank: Member

Groups: Registered
Joined: 8/14/2018(UTC)
Posts: 1

So my bake element popped 3 days before a big party at our house! I replaced it just in time and when I tried to burn it off, it was heating very slowly. Come to find out that the Main L2 relay on the control board is shot so the element only has 120 and not 240 on it. My question is this. There are two spades for L2 in so it would be very easy for me to move the L2 out over to L2 in and bypass the relay while I am getting a new board. I was hesitant to do this since I am not 100% certain of the relays purpose. It pulls in when you enter any bake/broil mode etc. So I am assuming it is just an added safety to avoid L2 from being out on one side of the coils when the oven is powered but not in operation. Anyone see an issue with temporarily bypassing it for now? Thanks for your input
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.