Kitchenaid broiler doesn't reignite. - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Kitchenaid broiler doesn't reignite. Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KGSA906PSS00	Brand: Kitchen Aid	Age: More than 10 years
Previous Topic Next Topic

Firebc		#1 Posted : Monday, January 8, 2018 1:37:11 PM(UTC)
Rank: Member Groups: Registered Joined: 1/8/2018(UTC) Posts: 4		My broiler will ignite and cycle off and then won't ignite again. The spark ignitor will click 3 separate times but sometimes it ignites and sometimes not. I have checked both the broil and bake valve across the common terminal and both have 210ohms. My suspicion is the DSI module and was wondering if anyone can confirm that? Thanks for any input!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Monday, January 8, 2018 9:22:19 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Start the troubleshooting from visual inspection of the broil burner lighting holes (near the igniter). They should be completely open. You can use a toothpick to clean them. Make sure the igniter tip is properly aligned with the lighting holes and it is clean.


User Profile View All Posts by User View Thanks

Firebc		#3 Posted : Tuesday, January 9, 2018 5:54:34 AM(UTC)
Rank: Member Groups: Registered Joined: 1/8/2018(UTC) Posts: 4		Gene, I will double check the burner and igniter alignment but I suspect they are fine because it does in fact ignite. It just seems after cycling it doesn’t always reignite. It does click/spark but the it appears power is not sent to gas valve because it doesn’t ignite and there is no gas odor. Thanks!


User Profile View All Posts by User View Thanks

Firebc		#4 Posted : Wednesday, January 10, 2018 6:13:24 AM(UTC)
Rank: Member Groups: Registered Joined: 1/8/2018(UTC) Posts: 4		I have checked the ignitor alignment and it looks good. The burner was inspected and is clean with no blocked holes. Any idea on what else could be wrong because it’s still doing the same thing. Thanks!


User Profile View All Posts by User View Thanks

Gene		#5 Posted : Wednesday, January 10, 2018 12:54:14 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Check the alignment of the gas regulator to the oven burner tube as described in attached service pointer. Align if it's needed. File Attachment(s): Service Pointer - 8178519 (Gas DSI Oven Will Not Reignite During Cooking Cycles).pdf (233kb) downloaded 3 time(s).


User Profile View All Posts by User View Thanks

Firebc		#6 Posted : Wednesday, January 10, 2018 1:13:43 PM(UTC)
Rank: Member Groups: Registered Joined: 1/8/2018(UTC) Posts: 4		I will check and advise. Thanks so much for your help!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close