Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
diydude99  
#1 Posted : Saturday, December 9, 2017 12:07:41 PM(UTC)
Quote
diydude99

Rank: Member

Groups: Registered
Joined: 12/9/2017(UTC)
Posts: 2

Hi,

Had to replace my dryer motor with a new motor (W10410996), and having extreme difficulty in putting back the original motor clamp/clip in front of the pulley.

Can only get one side on, but the other side won't hook in. No matter if I hit it straight down or at an inwards angle. Spent hours already. Something so simple can't take this long...

Maytag Performa Dryer PYE2300AYW
Motor retaining clamp/clip Part WP660658

Should I have ordered a new clamp? It looks exactly like the same as the original. Is there a new design so it hooks it easier for the other side?

Thanks for any suggestions!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
ThatGuy  
#2 Posted : Saturday, December 9, 2017 4:17:11 PM(UTC)
Quote
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
Make sure the clamp or the motor mount aren't bent. Here is a video. The important part starts at 3:30.

https://www.youtube.com/watch?v=hx5RkCetL8E
diydude99  
#3 Posted : Wednesday, December 13, 2017 1:43:24 PM(UTC)
Quote
diydude99

Rank: Member

Groups: Registered
Joined: 12/9/2017(UTC)
Posts: 2

Thanks for the response.

Finally resolved the issue after buying a new clamp, and tried it on. Didn't fit either so looked at the mount closely, and realized there is a little round notch in the middle of mount bracket.

Looked at the rubber gasket of the motor and it has a male round notch that should line up to the round notch on the mount bracket. Once motor was repositioned on the mount with the round notches matching up, the clamp installed onto the other ear with no issue.

So the little notch does make a difference in whether the clamp will hook onto the other ear. Hope this helps the next guy.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.