Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
maj127  
#1 Posted : Wednesday, May 3, 2017 12:29:55 PM(UTC)
maj127

Rank: Member

Groups: Registered
Joined: 5/3/2017(UTC)
Posts: 1

The metal lint clip in the lint mechanism is bent out of place. I have no idea what it is supposed to look like to fix it!! Please Help.

I have a matag Bravos XL

Thanks!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
PNWDrew  
#2 Posted : Wednesday, May 3, 2017 7:01:33 PM(UTC)
PNWDrew

Rank: Member

Groups: Registered
Joined: 2/2/2017(UTC)
Posts: 422

If you mean the flat piece down inside that pushes the filter against the rear wall of the duct you'll probably need to pull the front off to get to it unless you have very small hands. That's not a hard one to pull apart..

It should be shaped like #28 on this diagram. Often grabs the filter and bends out of shape.
Parts for Maytag MEDB700VQ0: Bulkhead Parts, Optional Parts (not Included) Parts - AppliancePartsPros.com

1st it isn't a major issue, so use the machine if needed while you sort it out. any lint that misses the filter will exit through the blower, no immediate risk.

If you wish to pull the front off and repair/replace post back and I or someone will help. I can't find a pic of it in it's proper shape.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.