Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
jk071604  
#1 Posted : Thursday, March 23, 2017 4:55:46 AM(UTC)
jk071604

Rank: Member

Groups: Registered
Joined: 3/23/2017(UTC)
Posts: 2

I was testing a door switch to my microwave before doing and work to it. I pit a screwdriver into the door switch on the outside of the switch as if the door was going to close into it and a big spark happened and lost power to the unit.

breaker did not trip but unit was plugged in at the time and not is just a square metal box hangijg....no power. I have the door switches ready to replace but assuming I know have a bigger problem any thoughts on what happened and will a door switch replacement still fix the issue?

Thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
jk071604  
#2 Posted : Sunday, March 26, 2017 6:47:54 PM(UTC)
jk071604

Rank: Member

Groups: Registered
Joined: 3/23/2017(UTC)
Posts: 2

Any thoughts? At this point I am going to open it up and see if I can replace some parts. If not will just buy a new one. Appreciate any help, thoughts or comments.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.