Rank: Member
Groups: Registered
Joined: 2/21/2017(UTC)
Posts: 2
|
I'm getting an e24 error code in the first few minutes of starting the cycle. Researching this is generally caused by either debris in the drain pump or output hose, or the drain pump is faulty.
I originally found broken glass and cleaned it out, which solved the problem for a while, but it returned. I cleaned out the filter and the impeller but still the e24. I then replaced the drain pump. Solved it for a few weeks. Now it's back and I can't get past it.
What can I try next?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/21/2017(UTC)
Posts: 2
|
Completely cleaned the drain system out, from pump to discharge into disposal. Ran the dishwasher open hose so there is no restriction, no water to even drain. Still getting an e-24. It happens 2 minutes into the cycle, where the drain pump tries to pump everything out. Thing is, there is nothing to pump out.
Must be a water sensor that is seeing water that is not there. Where would that come from?
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
