Rank: Member
Groups: Registered
Joined: 2/18/2008(UTC)
Posts: 1
|
Our Kitchen Aid Stove Glass Stove Top left front burner quit working. I was told it was a surface element. We replaced the surface element and it still is not working. Before replacing the old element the burner would still make the humming sound that it always did while it was heating up. Now that we have replaced it with a new one through AppliancePartsPro it doesn't work and no longer makes the humming sound. Could it be something electrical or a faulty replacement part?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Most likely the cause of the problem is the infinite switch for this burner. Remove the power from the range. Open the control panel and remove wires from the terminals H1 and H2. Turn the switch "on" and check for continuity across the terminals L1 & H1 and the terminals L2 & H2. If any of these circuits is open - the switch is bad and has to be replaced. - The part number for the infinite switch for the left front burner is AP3008912 Here are the break down diagrams for the Kitchen Aid range Model KERC500YAL1Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/24/2009(UTC)
Posts: 2
|
I need help in hooking up the new burnerof the kitchen aid range. I have the old burner and the new burner. The short brown wire doesn't allow me to hook up with the new burner.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
