Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
xoxrobot  
#1 Posted : Wednesday, September 21, 2016 11:12:51 AM(UTC)
xoxrobot

Rank: Member

Groups: Registered
Joined: 9/21/2016(UTC)
Posts: 1

Hello,

I live in an apartment that was provided with a washer and dryer by the landlord. The washer is a Whirlpool Duet front loading. It continually smells moldy so I went to clean the bellows and it was caked in mold/mildew. In the process the bellows slipped and I am not sure how to get it back on properly or how it should be fitted on/where it attaches to/etc.

There is a heavy dryer on top of it and it is pushed into a closet so I cannot take it out to remove the top or anything like that.

I just need to know if the bellows attaches itself to the actual washing drum part of the washer and how to get it back on.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
brobriffin  
#2 Posted : Wednesday, September 21, 2016 2:49:48 PM(UTC)
brobriffin

Rank: Member

Groups: Registered
Joined: 6/13/2014(UTC)
Posts: 781
Man
United States

Was thanked: 1 time(s) in 1 post(s)
It should be attached with a wire/spring band. This band belongs in the groove around the bellows holding it on the lip inside the door.
Watch Matt in this video show you how!
https://www.youtube.com/watch?v=7uEk61JOgRk
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.