Wolf SB486 Burner Problem/Adjustment - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Wolf SB486 Burner Problem/Adjustment Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: WOLF SB486 RESIDENTIAL SEAL COOKTOP	Brand: Sub Zero	Age: More than 10 years
Previous Topic Next Topic

HRMCHAN		#1 Posted : Tuesday, September 6, 2016 6:51:06 AM(UTC)
Rank: Member Groups: Registered Joined: 9/6/2016(UTC) Posts: 1		Previous burners working fine. I replaced one of the ceramic ignitor stems. Every went fine, no issues. But after reassembly I have TOO much gas coming out of the simmer burner. The resultant flame is 8 inches high on LOW and bug YELLOW portion at the TOP. What's my adjustment? Any WOLF Superstar ... THanks


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

cbmserviceguy		#2 Posted : Tuesday, September 6, 2016 8:10:10 AM(UTC)
Rank: Member Groups: Registered Joined: 3/28/2016(UTC) Posts: 200		I am not overly familiar with wolf, but it sure sounds to me like when you replaced the burner, the orifice was changed out as well. Are you running on LP? If so, I would think that's what happened and if the orifice isn't changeable you will need to order an LP burner.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close