Washer makes loud rubbing and now banging Noise - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Washer makes loud rubbing and now banging Noise Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: WM2801H*A	Brand: -brand-	Age: 1 - 5 years
Previous Topic Next Topic

Topmasters		#1 Posted : Tuesday, July 5, 2016 5:55:02 PM(UTC)
Rank: Member Groups: Registered Joined: 7/5/2016(UTC) Posts: 2		Have an LG Front Loading Washer. Works perfect until the spin cycle starts. Sound like tub is grinding against something. In the last couple of days it starts with a grind and now is banging very loudly. Inside drum seems to be stable with no extracurricular movement. I am afraid to continue using it. I have a little experience at this but not with this make and model. Can anyone help?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

brobriffin		#2 Posted : Wednesday, July 6, 2016 4:21:39 PM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		Open the door and with the stainless tub empty put your finger at the top of the rim and push up. if the stainless tub moves independent of the outer tub (you will see the gap decrease near the top) then the spider (support arm) is broken. This can be purchased @ LG 4434ER0002D Spider - AppliancePartsPros.com this link also includes a video. If the tub is firm and doesn't move independent of the outer tub then the bearings may be bad LG 4280FR4048L Bearing - AppliancePartsPros.com and LG 4280FR4048E Bearing - AppliancePartsPros.com these links also include a repair video.
		WWW

User Profile View All Posts by User View Thanks

brobriffin		#3 Posted : Wednesday, July 6, 2016 4:25:44 PM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		Also I would recommend if you have to replace the spider to go ahead and replace the bearings while you have it apart. Helps not having to repeat steps later. Just my opinion.
		WWW

User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close