Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Cantbe03  
#1 Posted : Sunday, March 27, 2016 10:15:33 PM(UTC)
Cantbe03

Rank: Member

Groups: Registered
Joined: 3/27/2016(UTC)
Posts: 2

My dishwasher stopped heating a few weeks back. I checked and the heating element had a dark spot that was cracked. So I replaced the element. That didn't fix the problem. I thought maybe the replacement part I got was bad, so I tried another new heating element with no luck. I then replaced the high temp thermostat even though tests on it came back good. That didn't fix the problem. Rusty I checked the ohms for the fuse and im not getting a reading. The service manual says a reading below 3 ohms means it's good. If the reading is over 3 ohms, to replace the board.

I am lost now. What else can I check to get this dishwasher fixed? I've replaced most heating parts. Please help!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
lsukevinc  
#2 Posted : Monday, April 4, 2016 6:47:59 AM(UTC)
lsukevinc

Rank: Member

Groups: Registered
Joined: 4/4/2016(UTC)
Posts: 2

Originally Posted by: Cantbe03 Go to Quoted Post
My dishwasher stopped heating a few weeks back. I checked and the heating element had a dark spot that was cracked. So I replaced the element. That didn't fix the problem. I thought maybe the replacement part I got was bad, so I tried another new heating element with no luck. I then replaced the high temp thermostat even though tests on it came back good. That didn't fix the problem. Rusty I checked the ohms for the fuse and im not getting a reading. The service manual says a reading below 3 ohms means it's good. If the reading is over 3 ohms, to replace the board.

I am lost now. What else can I check to get this dishwasher fixed? I've replaced most heating parts. Please help!



I have having the exact issue with a WDT710PAYM2. Replaced the heating element and no luck. What is the next step?
Cantbe03  
#3 Posted : Monday, April 4, 2016 6:37:05 PM(UTC)
Cantbe03

Rank: Member

Groups: Registered
Joined: 3/27/2016(UTC)
Posts: 2

Sadly I think I have to replace the main board. I've checked the fuse. But I can't replace just a fuse, it is built in. I have to replace the whole board. Flawed design!
lsukevinc  
#4 Posted : Monday, April 11, 2016 4:05:36 AM(UTC)
lsukevinc

Rank: Member

Groups: Registered
Joined: 4/4/2016(UTC)
Posts: 2

Originally Posted by: Cantbe03 Go to Quoted Post
Sadly I think I have to replace the main board. I've checked the fuse. But I can't replace just a fuse, it is built in. I have to replace the whole board. Flawed design!


It look 3 different control boards, but it is finally heating up now.?
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.