Hello! I accidentially unplugged my Maytag MHWE200XW00 washer while it was in cycle (the rapid wash rinse cycle, I believe). When I plug it in now, lights flash, but mainly it reads F1 E1 with three beeps. It is flashing the code and beeping continuously. I have the technical sheet and I ran the diagnostic test using the 3 button sequence, F1 E1 shows, but it won't allow me to do the automated test. Initially the door was locked, but I released it manually from through the bottom panel. There is no water in the unit, but I did have towels in there that could have soaked it all up. There is a clicking noise which I am to understand means that power is going to the CCU. Is there anyway to reset the computer?