Rank: Member
Groups: Registered
Joined: 10/29/2009(UTC)
Posts: 2
|
I had to replace the tube connector (rubber) on my KUDR24SE KitchenAid Dishwasher. I was told that part is no longer available and that I had to purchase the Middle Spray Arm & Supply Tube Kit. I received it with NO directions. Some of the pieces are a little different and am having problems putting it together. Nothing is labeled, do I use the old screw from the bottom to attach it? Do I use the old part that has a thin nozzle?????? Help would be greatly appreciated. Thanks
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
This kit contains of 5 parts which should be installed. There is only one screw (#2 on the diagram) and you have to use the old one. The diagram should help you to better understand the parts sequence. Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/29/2009(UTC)
Posts: 2
|
Hi Gene!
Thank you soooo much for responding quickly. I placed everything in and now my problem is that THE ARM IS NOT SPINNING FREELY. It seems to be to close. I used the old #2(on top), #17, #5 parts and the new #2 for the bottom. I placed this in the same spot on the top wire rack. There doesn't seem to be another spot to place it. The spacing for the wire rack is ~2 inches and the rest are ~ 1 1/2?????? Thanks
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
You might want to double check everything. There is nothing complicated.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/18/2010(UTC)
Posts: 5
|
Originally Posted by: Gene  You might want to double check everything. There is nothing complicated.
Gene. I am in a similar situation and need to know if I need to buy the whole kit or can I just buy the the tube itself as my current "soft" tube is worn out and needs replacement.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Originally Posted by: Flat I am in a similar situation and need to know if I need to buy the whole kit or can I just buy the the tube itself as my current "soft" tube is worn out and needs replacement. The complete model number of the dishwasher may help other to help you. Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/18/2010(UTC)
Posts: 5
|
Hi Gene,
It is Model# KUDC25CHBL1
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Originally Posted by: Flat Hi Gene,
It is Model# KUDC25CHBL1 Flat, Your model is different and you don't have to buy the hole kit. Buy whatever is broken. If you do need just the tube, then the tube Part number: AP3045018
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
