Need help urgently Please. Need service manual or know how - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Need help urgently Please. Need service manual or know how Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 106.53206202	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

bluefitness		#1 Posted : Friday, October 30, 2015 10:25:48 AM(UTC)
Rank: Member Groups: Registered Joined: 10/28/2008(UTC) Posts: 75 Was thanked: 1 time(s) in 1 post(s)		Model number: 106.53206202 I've tried everywhere to get the service/technical manual for this unit to no avail. Kenmore and whirlpool could not provide it. The refrigerator is not cooling, but the freezer is fine. The motorized air damper that feeds to refrigerator was in the closed position. I want to diagnose it instead of just guessing. There are 3 wires going to the damper. orange/black black yellow/red I'm getting 93v between orange/black and black I'm getting 23v from y/r to b I tried pushing on the damper manually. It is very hard to open. Can someone provide a wiring diagram or let me know what reading (and purpose) of the 3 wires? Thank you


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

bluefitness		#2 Posted : Friday, October 30, 2015 11:20:31 AM(UTC)
Rank: Member Groups: Registered Joined: 10/28/2008(UTC) Posts: 75 Was thanked: 1 time(s) in 1 post(s)		I figured out online how to run it in diagnostic mode. I held down the on/off button and filter button. I then pressed the filter button until step 5. I then received 120v to the air diffuser. It was still closed however. I could feel the diffuser vibrating. I then ran it in normal mode and 120v was being sent to the diffuser. My diagnoses leads me to believe it is the air diffuser. I checked both thermistors and they were at 2.3k ohms (I had them in the same air temp. What are your thoughts?


User Profile View All Posts by User View Thanks

denman		#3 Posted : Friday, October 30, 2015 11:21:46 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		See the attachment for the tech sheet
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

themarlars		#4 Posted : Saturday, October 31, 2015 12:08:26 PM(UTC)
Rank: Member Groups: Registered Joined: 10/30/2015(UTC) Posts: 7		For Future Users with the same question: The wiring diagram should be on the back of the fridge in a bag, underneath in a bag, or under the compressor/coil/fan cover somewhere in there either in a holder or a bag.


User Profile View All Posts by User View Thanks

bluefitness		#5 Posted : Monday, November 2, 2015 8:19:57 AM(UTC)
Rank: Member Groups: Registered Joined: 10/28/2008(UTC) Posts: 75 Was thanked: 1 time(s) in 1 post(s)		Thanks Denman for the wiring diagram. Do you know the sequence of operation for these dampers? Are they normally closed and then open with power?


User Profile View All Posts by User View Thanks

denman		#6 Posted : Monday, November 2, 2015 9:22:23 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Sorry but I do not know.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close