Kenmore 80 series washer agitating but not draining - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Kenmore 80 series washer agitating but not draining Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 11020872990	Brand: Kenmore	Age: More than 10 years
Previous Topic Next Topic

avai		#1 Posted : Tuesday, September 8, 2015 5:18:42 PM(UTC)
Rank: Member Groups: Registered Joined: 9/8/2015(UTC) Posts: 1		My washer starts normal, pulls water and agitates. When it comes to drain water before rinse or spin, it makes two click sounds and does not drain and hence does not spin. I am trying to figure out which parts to buy and replace. If lid switch is faulty or pump is faulty or belt is broken, no idea. I have checked and drain works under gravity. Appreciate experts advice.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Thursday, September 10, 2015 5:37:39 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Try bypassing the lid switch. Your symptoms are the classic sign of a failed lid switch, and if the machine works when you by pass the lid switch then replacing it will make things right.


User Profile View All Posts by User View Thanks

CrissySpice		#3 Posted : Sunday, September 13, 2015 8:33:37 AM(UTC)
Rank: Member Groups: Registered Joined: 9/13/2015(UTC) Posts: 1		Hi, How to bypass the lid switch?


User Profile View All Posts by User View Thanks

sidfink43		#4 Posted : Sunday, September 13, 2015 10:41:20 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Open up the console and you will find a plug that connects the lid switch to the wires from the timer. Disconnect the plug and insert an insulated wire into two holes in the terminal coming from the timer, using the holes that are not connected to a green wire (that is the ground). This will bypass the lid switch and if you put the machine on spin it should spin if the lid switch was the problem.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close