Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
KitchenAid Dishwasher not filling with water
Options
Go to last post Go to first unread
Brand: Kitchen Aid Age: 5 - 10 years
Previous Topic Next Topic
njallison@juno.com  
#1 Posted : Thursday, July 16, 2015 5:58:31 PM(UTC)
njallison@juno.com

Rank: Member

Groups: Registered
Joined: 7/16/2015(UTC)
Posts: 1
I have a kitchenaid dishwasher that is not filling with water. I've tested continuity for the float switch, the water inlet value, the door switch, thermo fuse, and the motor and all test ok. I've cleaned out the screen and impeller. A couple of months ago, the water inlet value did stop working and I replaced it. the inlet value is getting electricity. Seems to go through the cycles ok. Is there another reason the dishwasher would not work?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Friday, July 17, 2015 2:01:15 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Since the water valve is getting electricity (I am assuming 120 volts) and does not open I would say that the valve is toast.

I am not sure what screen you are referring to.
If it is not the one on the inlet side of the water valve you may want to check/clean that before replacing the valve.
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET