Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
benbenherenow  
#1 Posted : Thursday, April 9, 2015 1:26:32 PM(UTC)
benbenherenow

Rank: Member

Groups: Registered
Joined: 4/9/2015(UTC)
Posts: 1

Hi,
So glad to be here,any help appreciated. I just replaced the starter relay/overload 3 days ago,since the compressor would shut off after a few seconds.Compressor now works good, freezer gets near zero on 4. But the fridge will not get colder than 45. I had opened the freezer back panel and drain tube had no ice,fan would run when I plugged it in,and coils only had a little frost .Drain pan periodically has water in it,so seems defrost system is fine. Maybe an airflow problem? If that is true,I dont know what to do. Thanks fo any help. Ben oh....fridge is 13.5 years old, but compessor is only about 10,was repaced under warranty.Oh,and before the compressor starting problem,there was frost on MANY packages of foods in the freezer/
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
mikerj  
#2 Posted : Thursday, April 9, 2015 4:56:49 PM(UTC)
mikerj

Rank: Member

Groups: Registered
Joined: 4/6/2015(UTC)
Posts: 1

I was about to post myself, but this is very similar to the same issue I'm having so I'll follow this. My defrost system is working fine. Replaced the cold control and no change. I can't see an air return on my Kenmore and I'm thinking like you that maybe this is an airflow issue, but just can't see what could be wrong.
Users browsing this topic
Guest (2)
Similar Topics
Kenmore fridge not cold enough (Refrigerator & Freezer Repair)
by mxrider29 5/30/2012 4:06:47 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.