Rank: Member
Groups: Registered
Joined: 2/16/2015(UTC)
Posts: 2
|
Have an approx. 10-15 yr old top load Whirlpool that no longer wants to spin nor agitate. Not sure of "model" number but a sticker on the back of control panel has a 6-7 digit " Part"number starting with 3 and ending in "67" (the "67" number is for white while a reference to biscuit lists a different part number) . 3 knobs total..2 smaller on the left and 3rd larger on right side. "Commercial Quality" along with some other features listed towards top of front control panel.
Any thoughts on problem? Trying to determine if it's worth repairing or not.
Thanks
|
|
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806
Was thanked: 7 time(s) in 7 post(s)
|
Need to find the model number. Most likely a direct drive design but can't know for sure without model number. If it's a direct drive and it drains ok and motor runs while in agitate and spin but won't actually agitate or spin, it's most likely a faulty motor coupler which is a relatively easy and cheap repair.
Eric
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/16/2015(UTC)
Posts: 2
|
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
