Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
justin r  
#1 Posted : Wednesday, December 31, 2014 12:32:12 PM(UTC)
justin r

Rank: Member

Groups: Registered
Joined: 12/31/2014(UTC)
Posts: 2

Yesterday i found the washer sitting full of water to the point where it had poured out on the floor. Unit was off. So I drained the washer and turned it off. Today when i got home from work the washer was full of water again, with water all over the floor, unit was off. The strangest thing I have even seen... What is going on? Gremlins maybe? lol.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Thursday, January 1, 2015 5:29:36 AM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Well I think you have three possibilities. One is that the water inlet valves are not shutting off completely and allowing water to fill the machine even after it is turned off. You should be able to determine if this is the case by inspecting the washer after it has run through a full cycle. The second cause could be a bad pressure switch and the third cause could be the main control board.

Inside the lower service panel are tech notes that will tell you how to generate error codes and test components.
justin r  
#3 Posted : Thursday, January 1, 2015 5:41:16 AM(UTC)
justin r

Rank: Member

Groups: Registered
Joined: 12/31/2014(UTC)
Posts: 2

thanks for your help, ill check the codes. :)
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.