4 Pages<1234> Go to Page...

New Topic Post Reply

Kenmore top loader won't agitate Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: 11016512690	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

Seldom		#21 Posted : Monday, August 3, 2015 11:00:44 AM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 8/1/2015(UTC) Posts: 7		Model Number is 110.22922101
User Profile View All Posts by User View Thanks

fairbank56		#22 Posted : Monday, August 3, 2015 11:49:25 AM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Well, this model has a 3 speed motor and there is a speed switch (fabric selector). Have you tried different speed settings? I think it's more likely the speed switch vice the timer. Troubleshooting can narrow it down but too difficult to explain so just try replacing the speed switch. If it doesn't fix the problem you can return it and then go with the timer. Whirlpool 3953144 Switch-Cyc - AppliancePartsPros.com Whirlpool 3955337 Timer - AppliancePartsPros.com Eric
User Profile View All Posts by User View Thanks

Seldom		#23 Posted : Monday, August 3, 2015 12:44:11 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 8/1/2015(UTC) Posts: 7		I tried changing the speed while it was humming: it kept humming on all speeds except the "Intermittent Extra Slow/Slow ". Still sound like the speed switch?
User Profile View All Posts by User View Thanks

fairbank56		#24 Posted : Monday, August 3, 2015 2:41:34 PM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Does it agitate during that setting? It should agitate for 5 seconds and then just soak for 35 seconds and then agitate again for 5 seconds and repeat. Eric
User Profile View All Posts by User View Thanks

Seldom		#25 Posted : Monday, August 3, 2015 4:34:01 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 8/1/2015(UTC) Posts: 7		It doesn't agitate at all. It fills with water and then nothing but the hum. If I leave it humming for 10 seconds or so, it trips the circuit breaker. If I push in the timer and move it through the wash cycle, pulling up the timer at each click, nothing happens until I get to the Rinse cycle. It will then continue - spin/empty, then fill, spin/empty, etc. Final fill and spin, and the cycle ends normally.
User Profile View All Posts by User View Thanks

fairbank56		#26 Posted : Tuesday, August 4, 2015 5:16:45 AM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Well, you can bypass the speed switch to determine if that is the problem. You will have to make a couple of jumpers. Disconnect the speed switch and jump the blue/white and orange wires and also jump the yellow/blue and blue wires. If it still won't agitate, the speed switch is not the problem. Eric
User Profile View All Posts by User View Thanks

Seldom		#27 Posted : Tuesday, August 4, 2015 11:40:18 AM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 8/1/2015(UTC) Posts: 7		I disconnected the speed switch and jumped the wires as instructed - still doesn't agitate. It fills, hums for about 5 seconds (doesn't trip the circuit breaker), rests for about 35 seconds, then hums again for 5 seconds, etc. I let this go on for a few minutes, and couldn't tell if the timer had moved.
User Profile View All Posts by User View Thanks

fairbank56		#28 Posted : Tuesday, August 4, 2015 1:50:28 PM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Ok, so looks like a faulty timer. The thermal overload in the motor is tripping which will prevent the timer from advancing while it's tripped. It will reset itself once it cools. Eric
User Profile View All Posts by User View Thanks

Seldom		#29 Posted : Tuesday, August 4, 2015 2:33:13 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 8/1/2015(UTC) Posts: 7		I'll order the timer now. Just to confirm, I can return it for a refund if it's not the timer, right?
User Profile View All Posts by User View Thanks

fairbank56		#30 Posted : Tuesday, August 4, 2015 3:48:35 PM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Expert Joined: 10/16/2012(UTC) Posts: 3,806 Was thanked: 7 time(s) in 7 post(s)		Yes, that is correct.
User Profile View All Posts by User View Thanks

Quick Reply Show Quick Reply Security Image: Enter The Letters From The Security Image:

Users browsing this topic

Guest

Similar Topics

Kenmore top loader won't agitate (Washer Repair) by kafitz 11/4/2010 5:36:19 PM(UTC)

4 Pages<1234> Go to Page...

New Topic Post Reply