Kitchen Aid Dishwasher seems to have no power - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Kitchen Aid Dishwasher seems to have no power Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KUDP02SRSS2	Brand: Kitchen Aid	Age: 1 - 5 years
Previous Topic Next Topic

AllyCleveland		#1 Posted : Saturday, October 24, 2009 2:28:56 PM(UTC)
Rank: Member Groups: Registered Joined: 10/24/2009(UTC) Posts: 11		Our Kitchen Aid KUDP02SRSS2 dishwasher apparently stopped mid-cycle the last time we used it and now does not appear to have any power, as none of the lights on the touch pad nor control panel will turn on. I have verified that the outlet it is plugged into is working correctly and have tried resetting the circuit breaker. I also verified that it is latching correctly. Do you have any suggestions? I was looking at the the diagrams for it, but didn't see any area where a fuse could be replaced. Thanks in advance!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Sunday, October 25, 2009 5:01:39 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for WHIRLPOOL KUDP02SRSS2 \| AppliancePartsPros.com Here is your tech sheet http://www.servicematters.com/d...0Sheet%20-%208572216.pdf Take a look at Item 6 in Section 1 on the control board. Check that the hard wired or line cord murret (wire nut) connections are OK. Only proper way to check switches etc. is with a meter. Try to remember when exactly the unit went down as to what on the unit may have been turning on at that time so you can check it before replacing the fuse.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

AllyCleveland		#3 Posted : Monday, October 26, 2009 4:18:34 AM(UTC)
Rank: Member Groups: Registered Joined: 10/24/2009(UTC) Posts: 11		We just replaced the fuse with the new one we ordered from app.com and now the dishwasher is working again - it seems like it picked up right where the program must have stopped. Thanks again for your help!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close