Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
No Heat, Timer Does Not Advance
Options
Go to last post Go to first unread
Model: WED5310SQ0 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
MRGETITFIXED  
#1 Posted : Wednesday, August 27, 2014 8:36:01 AM(UTC)
MRGETITFIXED

Rank: Member

Groups: Registered
Joined: 8/26/2014(UTC)
Posts: 2
I have a whirpool electric dryer that runs but will not heat up at all and the timer does not advance. I've already changed the heating element, thermal fuse, and the dryer cycling thermostat which did not resolve the problem.

Nothing that I've done to this point has fixed the problem. I sure can use some good advice right about now.

Thanks!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
fairbank56  
#2 Posted : Wednesday, August 27, 2014 9:53:36 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Try resetting the AC panel breaker for the dryer. Your not getting L2 leg of power to the dryer either because half of breaker has tripped, faulty dryer power cord, faulty connection at power cord terminal block or faulty motor switch. If resetting breaker doesn't fix it, check for 240vac across outer terminals of power cord terminal block behind small cover on back of dryer.

Eric
Back to top
MRGETITFIXED  
#3 Posted : Wednesday, August 27, 2014 4:41:33 PM(UTC)
MRGETITFIXED

Rank: Member

Groups: Registered
Joined: 8/26/2014(UTC)
Posts: 2
Originally Posted by: fairbank56 Go to Quoted Post
Try resetting the AC panel breaker for the dryer. Your not getting L2 leg of power to the dryer either because half of breaker has tripped, faulty dryer power cord, faulty connection at power cord terminal block or faulty motor switch. If resetting breaker doesn't fix it, check for 240vac across outer terminals of power cord terminal block behind small cover on back of dryer.

Eric


Thanks! I tried resetting the breaker but it did not work. How do I go about checking the 240vac?
Back to top
fairbank56  
#4 Posted : Wednesday, August 27, 2014 5:08:20 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Does the timer not advance in both timed dry and auto dry? If so, you are most likely missing the L2 power leg or the motor switch is faulty. You would check for 240vac at the dryer receptacle and if good there, check at the power cord terminal block behind the small cover on the back of the dryer using a multimeter. If you have no experience doing this type of thing, I would suggest having a tech look at it. 240vac can be lethal if you come into contact with it.

Eric
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Whirlpool Dryer - No heat, Timer Does Not Advance (Dryer Repair)
by katielove22 10/21/2012 12:26:02 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET