f5 error code on fridgidaire - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

f5 error code on fridgidaire Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GLEF396ASA	Brand: Frigidaire	Age: 1 - 5 years
Previous Topic Next Topic

jmarker		#1 Posted : Tuesday, July 29, 2014 4:10:42 PM(UTC)
Rank: Member Groups: Registered Joined: 7/28/2014(UTC) Posts: 3		Hi there I got a fridgidaire flat top oven flashing f5 I can't find EOC PART eoc is located where I cannot find the part anywhere in the stove does it have another name?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Wednesday, July 30, 2014 1:20:58 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Parts for Frigidaire GLEF396ASA Range - AppliancePartsPros.com The EOC is item F20 in section 03. If this needs replacing you may also need a new overlay (item 20A in section 03). Have you tried unplugging the range for a few minutes to see if it will reset?
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

jmarker		#3 Posted : Wednesday, July 30, 2014 11:08:01 AM(UTC)
Rank: Member Groups: Registered Joined: 7/28/2014(UTC) Posts: 3		Yes sir and nothing happens


User Profile View All Posts by User View Thanks

denman		#4 Posted : Thursday, July 31, 2014 1:27:56 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		This is one complex unit. Below is a service manual. You will have to join the site and be logged in to be able to download the manual. Page 22 shows an F5 error. http://appliancejunk.com...wnloads;sa=view;down=283 There are other manuals in the Range, Oven & Cooktop Service Manuals section for Frigidaires that may have additional info. Looks like it is a communications error so the following may help. Connector Cleaning / Checking Unplug the unit Open it up Remove the ribbon cable from the keypad to the control board at the control board. Clean the edge connector. Use electronics contact cleaner or isopropyl alcohol. If it is the type where there is not a connector just the insulation is removed, it can be cleaned with a pencil eraser. Do not use an ink eraser as it is too abrasive. Check the tracks in the ribbon cable for hairline cracks. A magnifying glass helps here. Would not hurt to clean the connector on the board. Use electronics contact cleaner or isopropyl alcohol and a tooth brush. Be gentle and do not reconnect till all the solvent evaporates. Reconnect everything and give it a try.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close