Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
bikers75  
#1 Posted : Monday, June 2, 2014 6:07:48 AM(UTC)
bikers75

Rank: Member

Groups: Registered
Joined: 6/1/2014(UTC)
Posts: 2

Ignore my post of 6/01/14
Here is my problem. In normal pac motor stops when start switch is released. In extra pac it works fine ram goes down and stays until I turn the switch again just like it should. I replaced the motor but did not help.
What might be causing the problem? If I switch the gray and purple wires on the limit switch the motor works fine except extra pac works just like normal pac does. It does not extra pac and ram returns up.
Thanks for any help
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.