Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
oven and display has no power, range still sparks
Options
Go to last post Go to first unread
Model: KDPR462LSS08 Brand: Kitchen Aid Age: 5 - 10 years
Previous Topic Next Topic
matt hickman  
#1 Posted : Friday, April 4, 2014 5:17:39 AM(UTC)
matt hickman

Rank: Member

Groups: Registered
Joined: 4/4/2014(UTC)
Posts: 8
Gas range still ignites, electric/thermal convection oven and display panel has no power. Is this a fuse, transformer, control board issue? How do I figure out which one? Can't afford to buy and return parts to preforms process of elimination. Thx..
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Friday, April 4, 2014 5:54:40 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I cannot find any info on the given model number.
Tried a number of sources.
Please check it.

Some units do have a thermal fuse in the power supply to the control board.
THIS FORUM IS DEAD!!!!!!!
Back to top
matt hickman  
#3 Posted : Friday, April 4, 2014 6:45:43 AM(UTC)
matt hickman

Rank: Member

Groups: Registered
Joined: 4/4/2014(UTC)
Posts: 8
Yes I think I saw that in the schematic..thx
Back to top
matt hickman  
#4 Posted : Friday, April 4, 2014 6:48:08 AM(UTC)
matt hickman

Rank: Member

Groups: Registered
Joined: 4/4/2014(UTC)
Posts: 8
That is the correct model #. KDRP462LSS08
Back to top
matt hickman  
#5 Posted : Friday, April 4, 2014 7:24:29 AM(UTC)
matt hickman

Rank: Member

Groups: Registered
Joined: 4/4/2014(UTC)
Posts: 8
More help would be greatly appreciated...
Back to top
matt hickman  
#6 Posted : Friday, April 4, 2014 9:02:31 AM(UTC)
matt hickman

Rank: Member

Groups: Registered
Joined: 4/4/2014(UTC)
Posts: 8
Originally Posted by: matt hickman Go to Quoted Post
Gas range still ignites, electric/thermal convection oven and display panel has no power. Is this a fuse, transformer, control board issue? How do I figure out which one? Can't afford to buy and return parts to preforms process of elimination. Thx..

I still need help with this please...
Back to top
denman  
#7 Posted : Friday, April 4, 2014 10:53:11 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Whirlpool KDRP462LSS08 Range - AppliancePartsPros.com

See the attachment for the tech sheet.The unit does have a thermal fuse.
It should be close to the power transformer.
Sometimes it is a torpedo shaped part connected in one of the wires.
I could not find it in the parts but that is not unusual.
It should be 0 ohms.

If OK then measure the resistances of the transformer windings.
If it seems OK then measure the transformers out put voltage, should be around 20 volts AC. Measure it with the it connected and disconnected from the control board.
File Attachment(s):
KDRP426L.pdf (468kb) downloaded 19 time(s).
THIS FORUM IS DEAD!!!!!!!
Back to top
matt hickman  
#8 Posted : Friday, April 4, 2014 11:17:30 AM(UTC)
matt hickman

Rank: Member

Groups: Registered
Joined: 4/4/2014(UTC)
Posts: 8
Awesome..thank you! I will let you know what I find.
Back to top
matt hickman  
#9 Posted : Wednesday, April 16, 2014 2:47:51 PM(UTC)
matt hickman

Rank: Member

Groups: Registered
Joined: 4/4/2014(UTC)
Posts: 8
Ok..was able to locate control panel fuse..it is torpedo shaped..can't get any reading from my meter..meter only reads 1 .
Back to top
denman  
#10 Posted : Thursday, April 17, 2014 1:35:02 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
You will have to call the part's reps to get a replacement.
They have access to more parts info than I do.

Check that the fan runs OK once you replace the fuse.
Would also be a good idea to check that the oven temperature is OK.
, though it has it's own thermal cut-off on the back of the oven.
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (2)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET