Rank: Member
Groups: Registered
Joined: 4/4/2014(UTC)
Posts: 8
|
Gas range still ignites, electric/thermal convection oven and display panel has no power. Is this a fuse, transformer, control board issue? How do I figure out which one? Can't afford to buy and return parts to preforms process of elimination. Thx..
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638
Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
|
I cannot find any info on the given model number.
Tried a number of sources.
Please check it.
Some units do have a thermal fuse in the power supply to the control board. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/4/2014(UTC)
Posts: 8
|
Yes I think I saw that in the schematic..thx
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/4/2014(UTC)
Posts: 8
|
That is the correct model #. KDRP462LSS08
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/4/2014(UTC)
Posts: 8
|
More help would be greatly appreciated...
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/4/2014(UTC)
Posts: 8
|
Originally Posted by: matt hickman  Gas range still ignites, electric/thermal convection oven and display panel has no power. Is this a fuse, transformer, control board issue? How do I figure out which one? Can't afford to buy and return parts to preforms process of elimination. Thx.. I still need help with this please...
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638
Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
|
Here are your parts Parts for Whirlpool KDRP462LSS08 Range - AppliancePartsPros.comSee the attachment for the tech sheet.The unit does have a thermal fuse. It should be close to the power transformer. Sometimes it is a torpedo shaped part connected in one of the wires. I could not find it in the parts but that is not unusual. It should be 0 ohms. If OK then measure the resistances of the transformer windings. If it seems OK then measure the transformers out put voltage, should be around 20 volts AC. Measure it with the it connected and disconnected from the control board. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/4/2014(UTC)
Posts: 8
|
Awesome..thank you! I will let you know what I find.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/4/2014(UTC)
Posts: 8
|
Ok..was able to locate control panel fuse..it is torpedo shaped..can't get any reading from my meter..meter only reads 1 .
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638
Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
|
You will have to call the part's reps to get a replacement.
They have access to more parts info than I do.
Check that the fan runs OK once you replace the fuse.
Would also be a good idea to check that the oven temperature is OK.
, though it has it's own thermal cut-off on the back of the oven. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
