Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
daniel kline  
#1 Posted : Tuesday, March 25, 2014 2:32:39 PM(UTC)
daniel kline

Rank: Member

Groups: Registered
Joined: 3/25/2014(UTC)
Posts: 1

The machine just flashes finished/spin/wash lights and nothing happens. I tried unplugging then plugging in then holding down the rinse and delay button with one hand and turning the dial to cold/warm with the other and didn't get any results. I tried this a few times. I recently changed the boot gasket and it seems too coincidental for this to happen the next day. When I changed the boot gasket I had to take off the counter weights on the front of the machine. Could I have screwed something up when I changed out the boot gasket? What do these flashing lights mean? Thank you for any help you can give!

Dan
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
tim_danville  
#2 Posted : Saturday, August 8, 2015 1:45:43 PM(UTC)
tim_danville

Rank: Member

Groups: Registered
Joined: 8/8/2015(UTC)
Posts: 1

Unplug your machine, then plug it back in. Hold down the rinse and delay buttons with one hand. With the other hand, switch the dial from off to cold or warm or whatever cycle you want. All the buttons flash a few times, then just the start button flashes.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.