Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Relay and overload replacement
Options
Go to last post Go to first unread
Model: 79575283400 Brand: Kenmore Age: 5 - 10 years
Previous Topic Next Topic
Carreiro  
#1 Posted : Tuesday, December 31, 2013 12:59:03 PM(UTC)
Carreiro

Rank: Member

Groups: Registered
Joined: 12/31/2013(UTC)
Posts: 3
Relay and overload protector are no longer available for my fridge
So I'm forced to replacing it with a 3 n 1 start RC0410 not sure on the
Wiring I know we're the red,white & blk wires go but not sure of the other
2 black wires go
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
richappy  
#2 Posted : Wednesday, January 1, 2014 2:44:57 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Do NOT use the 3 n 1, it will blow out your compressor.
If you have a square, black item connected to two compressor terminals, that is the ptc start device. You need to make ohm meter measurements on it so I can help you.
Also, it would help to state your problem.
Back to top
Carreiro  
#3 Posted : Wednesday, January 1, 2014 6:57:25 AM(UTC)
Carreiro

Rank: Member

Groups: Registered
Joined: 12/31/2013(UTC)
Posts: 3
Fridge was not staying cold compressor was not starting I took out the relay and shook it and it sounded like everything was broken inside. Yes the relay has 2 wires a pink one and a blue one and the overload protector has a black wire
I checked the compressor with an ohm and it was fine
Back to top
Carreiro  
#4 Posted : Wednesday, January 1, 2014 7:21:28 AM(UTC)
Carreiro

Rank: Member

Groups: Registered
Joined: 12/31/2013(UTC)
Posts: 3
ScreenHunter_143 Nov. 22 20.04.jpg

This is what I have
Carreiro attached the following image(s):
image.jpg
Back to top
richappy  
#5 Posted : Thursday, January 2, 2014 12:13:14 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Make a diagram of the wires to the brown start device and order a new one.
Back to top
Users browsing this topic
Guest (2)
Similar Topics
KitchenAid start relay and overload replacement (Refrigerator & Freezer Repair)
by jwforshey 5/21/2012 5:53:33 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET