Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
lauren110288  
#1 Posted : Tuesday, December 24, 2013 7:34:38 AM(UTC)
lauren110288

Rank: Member

Groups: Registered
Joined: 12/23/2013(UTC)
Posts: 1

Had to move stove to install new microwave above. Moved stove back and now stove turns on (clock/lights/etc. all work), but the only eye that gets hot is the "warming zone" Oven also does to get warm. Tried flipping the breaker at the fuse box, no change! Any idea what it could be?? Thanks!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Wednesday, December 25, 2013 2:45:58 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here is the wiring diagram
http://manuals.frigidaire.com/p...pringfield/316519914.pdf

Sounds like you lost the 240 volts.
Check the power at the wall receptacle.
If OK check it at the terminal strip in the unit.

Be very careful as 240 volts is lethal.

L1 to Neutral should be 120 volts.
L2 to Neutral should be 120 volts
L1 to L2 should be 240 volts.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.