Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
spin switch
Options
Go to last post Go to first unread
Model: MAH3000WAW Brand: Maytag Age: 5 - 10 years
Previous Topic Next Topic
vp02031958  
#1 Posted : Wednesday, October 14, 2009 1:06:16 PM(UTC)
vp02031958

Rank: Member

Groups: Registered
Joined: 10/14/2009(UTC)
Posts: 1
I have replaced the control board and the wax motor..my clothes still come out dripping wet...I have examined the lower control board...it looks fine...no burn areas....I have now removed the 'spin switch' located in the upper area next to the wax motor...wondering if this could be my problem.. anything else to check before I am forced to purchase a lower control board for $220??

thx
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
sidfink43  
#2 Posted : Thursday, October 15, 2009 4:11:38 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
I am not sure which part you are refering to, but you can check the board using the procedures in the service manual. Here it is.

http://www.servicematters.com/m...ibrary/docs/16010061.pdf

Here is the Maytag tech bulletin on the replacement motor/motor control board package you will need if the board is bad.

http://www.servicematters.com/m...rary/docs/TDL-0018-B.pdf

and here is the part if you need it, a little less expensive than you have in your post, but unfortunately still a pretty big cost.

Part number: AP4010145
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Spin Switch broken off (Washer Repair)
by LindaPatricia 7/2/2015 6:11:32 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET