Rank: Member
Groups: Registered
Joined: 12/1/2013(UTC) Posts: 2
|
hello, looking for some help with my whirlpool quiet partner1, model du1010xtxq5. i read a post from a few yrs back,( http://forum.appliancepartspros...iii-dishes-wont-dry.html) and it seened close to my problem. the machine runs for a long time during dry cycle (high temp/heated dry) and is still doesnt dry well at all. during different times while in the drying cycle, i opened the unit up, and the heating element is always cold(never warm/hot) i have checked continuity on the element, and it seems ok. the above mentioned post suggested a "hi-limit thermostat", where would i find this, and how will i test it. i did notice a limit switch on the bottom of the unit(just on the surface of the machine) any help would be appreciated, thanks. kirk
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/1/2013(UTC) Posts: 2
|
more info.... i jumped the limit switch i mentioned in above post, and also checked the power source on the heating element during operation. there is no power going to the element with the switch open or closed.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close