GE Potscrubber 680 leaks under dishwasher - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

GE Potscrubber 680 leaks under dishwasher Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GSD680XX02WW	Brand: GE	Age: More than 10 years
Previous Topic Next Topic

Michael1155		#1 Posted : Friday, November 29, 2013 10:39:10 AM(UTC)
Rank: Member Groups: Registered Joined: 11/29/2013(UTC) Posts: 1		I have a GE Potscrubber 680 about 15 years old...it now leaks from the bottom center (the best I can see when looking underneath while running).....not sure whether to replace since it is so old or try to fix the problem....Water is draining into the sink drain as it's supposed to and the leaking was occurring after a few minutes in rinse and hold cycle. It leaks using any cycle but was trying this cycle to see the problem....Water leak is major as I was mopping up kitchen floor after I ran the cycle.....Any ideas on what the problem is and how to fix would really be appreciated!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Saturday, November 30, 2013 12:35:11 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Parts for GSD680XX02WW - AppliancePartsPros.com You have to find the leak. Kill power to the unit. Remove the kick plate and inspect under the unit. If this started as a slow leak you may see calcium deposits. If you cannot see it dry everything off and then restore power and run a cycle while watching it. Be careful that you do not touch any electrical connections. Water and electricity are a dangerous combination. A flashlight and a mirror come in handy when doing this. A mechanics mirror (same as a dentist's mirror just a little larger) is ideal. In a pinch you could tape a small mirror to a dowel or if you can get an old makeup compact with a mirror that will also work. It is nice if you can change the angle of the mirror. Often the water will run down a part then drip onto the floor so you have to check higher up in the unit. Common places for leaks are the wash/drain solenoid seal, holes in the sump and hose connections. Also it important to check your floor under the unit for rot.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close