Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Christopher111  
#1 Posted : Thursday, November 7, 2013 6:54:39 AM(UTC)
Christopher111

Rank: Member

Groups: Registered
Joined: 11/7/2013(UTC)
Posts: 1

Washer will fill and then not go into next cycle.

I smell a burning rubber smell the longer I leave the knob pulled out.

I will hear a hum for a while and then it goes away. I will push the knob in and wait for a few hours and when I pull the knob out, the hum comes back.

After that, I can spin the knob clockwise while pushed in and hear/feel the clicks. If I do that quickly a few times, it will start to engage and I can feel it trying to come on in certain positions.

Eventually it will turn on when I spin it enough times.

I already replaced the timer, thinking that was the problem but that did not fix it.

Yesterday I tried it again and I could not get it to come on at all.

This started about four months ago and has progressively gotten worse.

Any Ideas?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
fairbank56  
#2 Posted : Thursday, November 7, 2013 7:26:11 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Check the water pump.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.