help replacing clutch - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

help replacing clutch Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: RAS8445KQ0	Brand: Roper	Age: 5 - 10 years
Previous Topic Next Topic

rednran		#1 Posted : Friday, February 8, 2008 4:08:53 AM(UTC)
Rank: Member Groups: Registered Joined: 2/8/2008(UTC) Posts: 4		I need to replace the clutch and I would love a step by step guide (with pictures if possible--they help alot). Thanks to anyone who can help.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

bentwrench1999		#2 Posted : Friday, February 8, 2008 12:25:27 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 12/14/2007(UTC) Posts: 72		This job is actually easy for most do-it-yoursefers. Follow the link here which will help with MOST of the disassembly. You can probabley figure the rest out if you navigate the pages properly. Good Luck..wrench RepairAve.com - Free appliance repair help and troubleshooting


User Profile View All Posts by User View Thanks

rednran		#3 Posted : Friday, February 8, 2008 5:09:38 PM(UTC)
Rank: Member Groups: Registered Joined: 2/8/2008(UTC) Posts: 4		I see everything BUT clutch replacement there. I already have the outside taken off. Any help?


User Profile View All Posts by User View Thanks

rednran		#4 Posted : Tuesday, February 12, 2008 4:29:38 AM(UTC)
Rank: Member Groups: Registered Joined: 2/8/2008(UTC) Posts: 4		Ok I got the clutch off----in doing so I found that two of the three bolts that hold up the transmission were snapped off. Before I replace the clutch could you tell me if those missing bolts could keep the machine from spinning right? Thanks.:confused:


User Profile View All Posts by User View Thanks

bentwrench1999		#5 Posted : Tuesday, February 12, 2008 9:21:37 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 12/14/2007(UTC) Posts: 72		Hey Red, I've seen this before. Your washer will not spin with these bolts broken. You should be able to remove the broken bolts O.K. Maybe use an easy out. Replace the bolts, tighten each one a bit at a time, evenly until they are flush with the case. Tighten them up. It does not take a lot of torque. I would say 25-30 lbs. of torque. I would replace the coupler while you are here.Let me know if I can assist again...wrench:)


User Profile View All Posts by User View Thanks

rednran		#6 Posted : Thursday, February 14, 2008 5:27:40 AM(UTC)
Rank: Member Groups: Registered Joined: 2/8/2008(UTC) Posts: 4		Thanks Bent thats what we were thinking. Sure enough we replaced the bolts and didn't replace the clutch and it works like new. Taking the clutch back for a refund---good idea not to open the package until you're sure.:D


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close