Rank: Member
Groups: Registered
Joined: 10/21/2013(UTC) Posts: 1
|
Hi,
For the last several months, my Whirlpool Quiet Partner II won't dry the dishes. When it gets to the Clean cycle the green light flashes repeatedly. When I open the door the temperature of the air is very hot but the dishes are dripping wet and I end up letting them air dry overnight with the door open. Other than this issue the dishwasher works fine. Any suggestions for diagnosing what part may be malfunctioning?
Thanks!
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/16/2013(UTC) Posts: 916
|
Check to make sure you have 120v going to the element during the dry cycle and continuity test the heat element make sure it's 60 ohms or less............if those 2 check out ok then you possibly have a problem with the main board that's intermittent or a wire harness/connection issue.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close