Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
stanww  
#1 Posted : Monday, October 14, 2013 9:42:30 AM(UTC)
stanww

Rank: Member

Groups: Registered
Joined: 10/14/2013(UTC)
Posts: 1

Recently our washer would not spin up to speed. The spinning was slow.
I ordered a new control board. It came with a motion sensor. My original control board did not have this sensor on it, but it did have the connector. The new control board did the same thing,,,,,all wash cycles good, but the spinning is slow. I put back in my original control board, but also hooked up the motion sensor that was sent. The spinning did great. It was the absence of the motion sensor that was keeping the spinning slow. My mind boggling concern: why did my original control board not have the sensor, but for a few years the spinning was alway good? Why? Now it suddenly needs the sensor!!!...
Anyway, i found out that if you don't have the motion sensor connected, the motor will never get above 180 rpm.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
babulrush  
#2 Posted : Friday, November 29, 2013 9:09:15 PM(UTC)
babulrush

Rank: Member

Groups: Registered
Joined: 11/29/2013(UTC)
Posts: 1

Originally Posted by: stanww Go to Quoted Post
Recently our washer would not spin up to speed. The spinning was slow.
I ordered a new control board. It came with a motion sensor. My original control board did not have this sensor on it, but it did have the connector. The new control board did the same thing,,,,,all wash cycles good, but the spinning is slow. I put back in my original control board, but also hooked up the motion sensor that was sent. The spinning did great. It was the absence of the motion sensor that was keeping the spinning slow. My mind boggling concern: why did my original control board not have the sensor, but for a few years the spinning was alway good? Why? Now it suddenly needs the sensor!!!...
Anyway, i found out that if you don't have the motion sensor connected, the motor will never get above 180 rpm.


Actually the machine in the washer is getting corresponded with the speed, and that's why as soon as you installed the motion sensor security lighting on it,, it actually started correlating the speed.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.