Rank: Member
Groups: Registered
Joined: 10/2/2013(UTC)
Posts: 5
|
Im having issues with my GE Cafe dishwasher not starting, The light on the key pad illuminates when pressed however the dishwasher will not start. Could it possibly be the door switch? If so what is the procedure for testing the switch?
Thank You
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/16/2013(UTC)
Posts: 916
|
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/2/2013(UTC)
Posts: 5
|
All of the buttons appears to be working...the dishwasher just will not start when door is closed.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/16/2013(UTC)
Posts: 916
|
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/2/2013(UTC)
Posts: 5
|
Originally Posted by: HumboldtRepairMan  Does it fill with water? No nothing happens, the start light is illuminated when pressed but no water enters machine.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/16/2013(UTC)
Posts: 916
|
More then likely your touchpad is bad or your main computer board. Look under the unit or behind the panel for the tech sheet it should show you how to ohm test the touchpad. Check for 120v at the main control board from tan to white with the door switch tripped. Ohm test the door switches for continuity.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/2/2013(UTC)
Posts: 5
|
Thanks for your help...I will try what you have suggested.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
