Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
[COLOR="Blue"]Do you think I might not have done correcctly in testing the thermistor or have missed something?[/COLOR] I do not know.
yes if the thermistor is bad or not in the correct position it will cause temperature control problems.
It sounds like your thermistor is OK so the control board is probably bad. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Rank: Member
Groups: Registered
Joined: 7/23/2013(UTC) Posts: 19
|
What is the part#? where is it? My model#10656693501 (Kenmore). In the attachment I have part #2313178 (Control Board Assembly) (#6) in the picture on the left upper corner and 2323177 (Electronic Control) (#19) on the right upper corner. Thanks.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
The board you want is Item 19. You gave 2323177 as the part number but it should be 2313177. Part number: AP3859538
|
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Rank: Member
Groups: Registered
Joined: 7/23/2013(UTC) Posts: 19
|
Yes, it should be 2313177. Sorry for the typo.
Where is it located? In the back close to the compressor/condenser or in the front but behind the panel in the fresh food compartment?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
Looks to me that it is in a box under the unit by the condenser fan but I am not sure about this. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Rank: Member
Groups: Registered
Joined: 7/23/2013(UTC) Posts: 19
|
Dear Denman,
I finally had the control board replaced with the help of a local professional. And all the problems have been resolved.
Although I did not finish the job on my own, I was very close to it. I should say every step you told me was right. I very much appreciated your time and patience in helping locate the problem.
I could have saved some money if I had kept going with the help from you. But what I've learned from you will certainly be sueful for me in future. Thank you again:)
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close