Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Kenmore dryer not working
Options
Go to last post Go to first unread
Model: C110-8170091 Brand: Kenmore Age: More than 10 years
Previous Topic Next Topic
JuanY  
#1 Posted : Tuesday, May 21, 2013 8:57:38 AM(UTC)
JuanY

Rank: Member

Groups: Registered
Joined: 5/21/2013(UTC)
Posts: 3
Hi, I have a 15+ year old dryer...it started making a louder than usual humming noise in the last week and yesterday it completely stopped working. I have taken it apart and tested the different components with a multimeter and all the parts seem to show resistance...any other thoughts on trouble shooting the problem? When I press the start button, it makes a loud humming noise for a few seconds then stops. I do not know if the drum was spinning but when i try to rotate the drum manually, it does not rotate
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Simon / APP Team  
#2 Posted : Tuesday, May 21, 2013 1:37:20 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

The model number you provided is incorrect. Please check and re post.
Try to turn the motor both directions. Is it jammed?

Simon.
Back to top
JuanY  
#3 Posted : Tuesday, May 21, 2013 9:16:54 PM(UTC)
JuanY

Rank: Member

Groups: Registered
Joined: 5/21/2013(UTC)
Posts: 3
Originally Posted by: Simon / APP Team Go to Quoted Post
Hi.

The model number you provided is incorrect. Please check and re post.
Try to turn the motor both directions. Is it jammed?

Simon.



hi simon, the model # is C110_8170091...reading it directly off the stamped plate by the door...is the C a designation for Sears Canada (I do live in Canada)? Other information serial#9GK3891, Type DR-6, 120/240 Volts, 24 Amps, 60HZ

I can turn the motor shaft in both directions however when the dryer was still assembled, I could not seem to rotate the drum
Back to top
Simon / APP Team  
#4 Posted : Wednesday, May 22, 2013 9:13:54 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

Yes, you are right. It's a Canadien model number, I can't look it up.
Try to do this - tape the door switch in, push the start button and turn the drum.
If the dryer starts, then the motor is bad.
Sorry, can't be more specific.

Simon.
Back to top
JuanY  
#5 Posted : Friday, May 24, 2013 10:40:37 AM(UTC)
JuanY

Rank: Member

Groups: Registered
Joined: 5/21/2013(UTC)
Posts: 3
hi Simon, I reassembled the dryer and pressed start and it seems to be working again????

I ran it a few minutes empty and it sounded ok. I tried a full load and noticed the dryer sounds being louder. after the dryer stopped, it restarted (as per normal) and it sounded like a loud screech at first and then back to normal. IS this an indicator the drum belt needs to be replaced? That the belt is becoming worn and not gripping the drum as snugly as before?
Back to top
Simon / APP Team  
#6 Posted : Friday, May 24, 2013 12:54:07 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
It's not the belt. Check if the drum is rotating freely. Also it may be the motor.

Simon.
Back to top
Users browsing this topic
Guest (3)
Similar Topics
kenmore dryer not working (Dryer Repair)
by nfg kenmore 12/9/2010 3:01:31 PM(UTC)
kenmore dryer not working (Dryer Repair)
by alfee 2/7/2009 3:14:29 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET