GE Triton XL - Stuck on rinse cycle, drain pump runs constantly - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

GE Triton XL - Stuck on rinse cycle, drain pump runs constantly Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GSD6760G00SS	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

str-il		#1 Posted : Thursday, May 16, 2013 4:02:50 PM(UTC)
Rank: Member Groups: Registered Joined: 5/16/2013(UTC) Posts: 4		GE Triton XL, GSD6760G00SS is stuck on the rinse cycle. The drain pump runs constantly. I filled the tub with water using a bucket, twice and when closing the door, it drains, but does not switch to the wash cycle. I also exercised the float switch, but not sure if that only functions for overflows. I tried holding the start/resent button constantly, but it won't shut off. When I open and close the door the drain pump just constantly runs.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Simon / APP Team		#2 Posted : Thursday, May 16, 2013 7:35:22 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		HI. Based on the information you provided it's a bad control board Part number: AP3203951 Here are the breakdown diagrams and Escutcheon & Door Assembly parts for GE GSD6760G00SS - AppliancePartsPros.com Post the results. Simon.


User Profile View All Posts by User View Thanks

str-il		#3 Posted : Friday, May 17, 2013 6:47:49 AM(UTC)
Rank: Member Groups: Registered Joined: 5/16/2013(UTC) Posts: 4		I decided to try turning the breaker on and off. I first turned the breaker off, while the unit was off, then back on. Then I started the unit and turned the breaker off and back on after about a minute. That seems to have reset the control in some way. I then was able to run several rinse cycles and have successfully ran a full wash cycle. I will keep an eye on it and if it happens again, I will investigate a new controller board. Thank you Simon for your input. I will post updates if it happens again. :)


User Profile View All Posts by User View Thanks

str-il		#4 Posted : Thursday, June 12, 2014 6:23:40 PM(UTC)
Rank: Member Groups: Registered Joined: 5/16/2013(UTC) Posts: 4		Originally Posted by: str-il I decided to try turning the breaker on and off. I first turned the breaker off, while the unit was off, then back on. Then I started the unit and turned the breaker off and back on after about a minute. That seems to have reset the control in some way. I then was able to run several rinse cycles and have successfully ran a full wash cycle. I will keep an eye on it and if it happens again, I will investigate a new controller board. Thank you Simon for your input. I will post updates if it happens again. :) Still working after about a year and a month later! We run it 7-9 times per week.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close