Display not working properly Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: SEC301 BS/02	Brand: Thermador	Age: 5 - 10 years
Previous Topic Next Topic

lofty		#1 Posted : Tuesday, April 23, 2013 9:12:38 PM(UTC)
Rank: Member Groups: Registered Joined: 2/5/2012(UTC) Posts: 3		The main display (clock - temp) does not work properly. Time for instance, shows 10:89 instead of 10:10. Do I need to replace the control board? It's a bloody expensive part and I hate to just start swapping parts.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

denman		#2 Posted : Wednesday, April 24, 2013 4:53:49 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		I cannot find any info on the given model number. It does sound like the control board needs replacing. The one caveat is that the display is part of the control board. I would try removing power from the unit for a couple minutes just to see if the board will reset,
		THIS FORUM IS DEAD!!!!!!!
User Profile View All Posts by User View Thanks

lofty		#3 Posted : Thursday, April 25, 2013 12:15:40 PM(UTC)
Rank: Member Groups: Registered Joined: 2/5/2012(UTC) Posts: 3		[FONT='Calibri','sans-serif']Hi thanks for the response. I have tried shutting off the power and re-starting to no avail. I've also tried removing the board, cleaning all connections with alcohol. It should be noted that other than this the oven functions just fine. [/FONT]
User Profile View All Posts by User View Thanks

denman		#4 Posted : Thursday, April 25, 2013 1:10:01 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		You could just live with it. It sounds like the driver IC that runs the display is shot.
		THIS FORUM IS DEAD!!!!!!!
User Profile View All Posts by User View Thanks

lofty		#5 Posted : Thursday, April 25, 2013 1:23:04 PM(UTC)
Rank: Member Groups: Registered Joined: 2/5/2012(UTC) Posts: 3		I could live with it without any problem. Problem is the site forman is a real ballbuster.... Any schematics available? If I had that I could trouble shoot the the failed IC, a phone call to DIGIKEY and some soldering I could have here fixed!
User Profile View All Posts by User View Thanks

denman		#6 Posted : Friday, April 26, 2013 1:17:54 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Sorry but the manufacturers do not publish schematics.
		THIS FORUM IS DEAD!!!!!!!
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)