Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
pizzoli  
#1 Posted : Wednesday, February 13, 2013 9:37:22 AM(UTC)
pizzoli

Rank: Member

Groups: Registered
Joined: 2/13/2013(UTC)
Posts: 2

I lost all power to the oven (whirlpool gold Mod. GBD307PRS01) during a preheat cycle. I have reset the breaker. I have also previously replaced the control board and the touch panel with sucesss. The oven worked just fine for months until this preheat power loss. No oven light or any signs of power. Also, it is hadrwired into the wall. No plug.
Please help
-AP
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Simon / APP Team  
#2 Posted : Wednesday, February 13, 2013 11:29:10 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

Hi.

Check if you have a thermal link fuse inline of the black wire at the control board plug P24-3. If it's open - replace it and move the harness away from the hot exhaust vent.
There are two types connectors:

Part number: 4456654
Part number: 4456654


and Part number: 4451042
Part number: 4451042


Here are the breakdown diagrams and Control Panel parts for Whirlpool GBD307PRS01 - AppliancePartsPros.com

Post the results.

Simon.

P.S. There is still a possibilities of a bad connection in the junction box behind the oven. Check if there is 240VAC to the oven connector block.
pizzoli  
#3 Posted : Thursday, February 14, 2013 5:37:46 PM(UTC)
pizzoli

Rank: Member

Groups: Registered
Joined: 2/13/2013(UTC)
Posts: 2

I wish I had waited to read this response before I went through all the trouble of pulling the unit out of the wall and bypassing the two thermal fuses one the back of the oven only to figure out it was the thermal fuse on the control board.
Thanks for the response it was right on the money.
Simon / APP Team  
#4 Posted : Friday, February 15, 2013 8:41:29 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

You are welcome. Sorry for the delay.

Simon.
Users browsing this topic
Similar Topics
Oven lost power during cleaning mode door locked (Microwave Repair)
by JeffreyD 12/3/2010 6:40:33 AM(UTC)
Kitchen aid double oven lost power during clean (Oven Repair (including Ranges and Cooktops))
by bgood 12/8/2009 5:11:01 AM(UTC)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.