Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
GE Dishwasher
Options
Go to last post Go to first unread
Model: GLD4500N10WW Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
lclark  
#1 Posted : Wednesday, January 30, 2013 4:32:31 AM(UTC)
lclark

Rank: Member

Groups: Registered
Joined: 1/29/2013(UTC)
Posts: 3
I have a GE dishwasher that would not do anything,so I replaced the control board.When I put power to it the clean light blinked on and off and beeps also.I would try to reset it again and the same thing happens.Any helpwould be greatly appreciated.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Wednesday, January 30, 2013 3:17:27 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hello,

After you replaced the control board the dishwasher should go through the calibration automatically. The dishwasher will enter into the calibration mode when the unit is first powered on. The door must be closed and latched. You have to wait approximately 6 minutes for the second fill before canceling the cycle by pressing the start reset pad.

Did you do it?

Gene.
Back to top
lclark  
#3 Posted : Thursday, January 31, 2013 3:53:34 AM(UTC)
lclark

Rank: Member

Groups: Registered
Joined: 1/29/2013(UTC)
Posts: 3
I did not wait the 6 min.When i powered up and the clean light blinked on and off and beeped until I pressed a button the beeping stopped but the clean light still blinked on and off.I did this several times.
Back to top
Gene  
#4 Posted : Thursday, January 31, 2013 3:03:53 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Possible it did not finish the calibration. Try to do it again from the scratch.

Gene.
Back to top
lclark  
#5 Posted : Friday, February 1, 2013 8:58:56 AM(UTC)
lclark

Rank: Member

Groups: Registered
Joined: 1/29/2013(UTC)
Posts: 3
I tried it from scratch,does the same thing.Clean light flashes and beeps.I waited 10 min.Can you tell me how you put into service mode?
Back to top
Gene  
#6 Posted : Friday, February 1, 2013 11:47:43 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Sure. The procedure described in the attached mini-manual.

Gene.
File Attachment(s):
31-30477 (1) - GLD4500N10WW.pdf (583kb) downloaded 102 time(s).
Back to top
Users browsing this topic
Guest (3)
Similar Topics
GE dishwasher GDT695SSJ0SS middle arm not spinning (Dishwasher Repair)
by merrittjr 3/23/2024 10:51:00 AM(UTC)
GE Dishwasher GDF620HMJ2ES (Dishwasher Repair)
by lou@officenerd.com 1/14/2024 3:32:20 PM(UTC)
GSD5120D00BB GE dishwasher leaking at the bottom corners (Dishwasher Repair)
by ron Minervino 12/7/2023 9:15:11 AM(UTC)
GE Dishwasher Model GDT655SSJ2SS (Dishwasher Repair)
by Dan Jones 11/16/2023 11:33:43 AM(UTC)
GDF610PMJ5ES (GE Dishwasher) - No Power to LED Display (Dishwasher Repair)
by txwildcard 6/7/2023 2:40:51 PM(UTC)
GE dishwasher GDT580SSF5SS water doesn't get hot and dishes are not drying (Dishwasher Repair)
by jmbuffy 5/15/2023 4:45:57 PM(UTC)
GE Dishwasher Loads water but never agitates to clean dishes (Dishwasher Repair)
by Guest 4/19/2023 6:38:21 AM(UTC)
GE Dishwasher, Model: GDF530PGM0WW (Dishwasher Repair)
by Guest 4/12/2023 12:06:40 PM(UTC)
GE Dishwasher GSD900D-02 Door Gasket Gap (Dishwasher Repair)
by DJW000 2/5/2023 10:05:34 AM(UTC)
GE Dishwasher dead UI board (Dishwasher Repair)
by Guest 1/26/2023 9:44:03 PM(UTC)
GE dishwasher - general query about a ball at the back in the tube (Dishwasher Repair)
by delboy1881 7/27/2022 7:49:15 AM(UTC)
GE Dishwasher beeps every 10 seconds (Dishwasher Repair)
by bethH 7/12/2022 3:03:53 AM(UTC)
Ge dishwasher seal replacement (Dishwasher Repair)
by Guest 4/21/2022 5:34:16 AM(UTC)
GE Dishwasher - No Power - Replaced Control Board, Wiring Harnes, and UI Board (Dishwasher Repair)
by aervin 4/19/2022 7:32:28 AM(UTC)
GE dishwasher not filling and other problems (Dishwasher Repair)
by Guest 4/14/2022 3:40:35 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET