GE Built-In Gas Oven Won't Work Even After Replacing Parts - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

GE Built-In Gas Oven Won't Work Even After Replacing Parts Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: JGRP16GEP1BG	Brand: GE	Age: More than 10 years
Previous Topic Next Topic

kimpossible		#1 Posted : Thursday, January 17, 2013 4:30:57 PM(UTC)
Rank: Member Groups: Registered Joined: 1/17/2013(UTC) Posts: 2		Hello everyone, Not sure if this is where I'm supposed to post but was wondering if you guys could help me. I have a GE built-in gas oven which had a weak ignitor glow so I decided to replace it with a new ignitor replacement part. However, after replacing the 2 ignitors (bake & broil) and one temperature sensor--it still will not turn on. I don't think it's the gas valve because first the ignitor has to glow red before the gas valve can turn on according to what I've read. But now, the ignitor doesn't glow at all so I'm not quite sure what's wrong. When I replaced the parts, I put all the wiring back in its original position and everything. Any insight would be super helpful! Thank you in advance for all your help!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Baudretsch		#2 Posted : Thursday, January 17, 2013 9:21:26 PM(UTC)
Rank: Member Groups: Registered Joined: 11/29/2007(UTC) Posts: 16		You wrote that you replaced the ignitor "because it had a weak glow". But it did glow. Then, either the wiring wasn't connected correctly or the new ignitor is faulty (rare, but it does happen, the older style silicon carbide ignitors are very fragile, and the smallest crack will do it). You could try using a volt/ohm meter to first check continuity through the ignitor and, if you find that the ignitor conducts, test the power coming to the ignitor. Good Luck


User Profile View All Posts by User View Thanks

Baudretsch		#3 Posted : Thursday, January 17, 2013 9:22:59 PM(UTC)
Rank: Member Groups: Registered Joined: 11/29/2007(UTC) Posts: 16		To clarify, the re-wiring may be faulty. It happens to the best of us. So check that first. Check for broken insulation shorting to the body of the oven too.


User Profile View All Posts by User View Thanks

kimpossible		#4 Posted : Thursday, January 17, 2013 11:03:02 PM(UTC)
Rank: Member Groups: Registered Joined: 1/17/2013(UTC) Posts: 2		Thanks for getting back to me! I'm thinking it may be an issue with re-wiring so I'll give that a try again tomorrow. Thanks again!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close