Rank: Member
Groups: Registered
Joined: 5/14/2011(UTC) Posts: 22
|
The circulation pump has the proper voltage, no blockage, so i need to know how to ohm it and what the ohms should be before i call it bad and replace it. Thank you!
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
I do not have a spec on the winding resistance.
But if the motor rotates easily and does not run when it has 120 volts across it then it is toast. |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Rank: Member
Groups: Registered
Joined: 5/14/2011(UTC) Posts: 22
|
Originally Posted by: denman  I do not have a spec on the winding resistance.
But if the motor rotates easily and does not run when it has 120 volts across it then it is toast. That was my thought as well. Was just hoping to get the resistance spec to be 100% certain...that's one expensive part for a cheap dishwasher! Might be better off just getting a new one! Thanks for your reply!
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close