Rank: Member
Groups: Registered
Joined: 11/4/2012(UTC)
Posts: 1
|
How do we take out the control panel display for our double oven? After removing some screws, it looks like our oven may have the control panel display connected to the oven itself.
Any diagrams or instructions will be most helpful.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/15/2013(UTC)
Posts: 4
|
I am having the same problem trying to get to the control board. The oven in the pictures of the above attachment do not match my oven. I read on another forum that the whole oven may need to be pulled out to get the control panel off, can anyone confirm this.
thanks
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Originally Posted by: beebop  ...that the whole oven may need to be pulled out to get the control panel off... It may help if you will pull the oven out for 10"-12". You don't have to pull it out completely. Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/15/2013(UTC)
Posts: 4
|
For anyone else who may have this oven here are some clarifying steps to get to the control board. Remove the trim screws and trim remove screws that hold oven to enclosure(cabinet) pull oven out a bit (maybe 1/2 inch) and on either side of the control panel are 2 screws that need to be removed, then lift up to get the control panel over the tabs and then outward. the problem i now run into is that i cannot get the control panel out far enough to disconnect the wires. I am wondering if, like the previous post says, i need to pull the oven out more. Maybe there is a plate on the top that comes off for better access? beebop attached the following image(s):
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Originally Posted by: beebop ...I am wondering if, like the previous post says, i need to pull the oven out more. Maybe there is a plate on the top that comes off for better access?... You will never know until you try. Gene.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
