AppliancePartsPros.com
»
Appliance Repair Help
»
Microwave Repair
»
Keypad works and light comes on: turntable doesn't work and no hum or blower sound
Rank: Member
Groups: Registered
Joined: 10/13/2012(UTC) Posts: 2
|
The light comes on and the keypad works fine. When you press start,it starts counting down and the light stays on but the turntable does not spin and nothing else happens. It is silent. No blower or humming. I tried auto settings like "popcorn" and had the same result. I flipped the breaker off to try to reset it and nothing changed. Does anyone have any ideas?
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/19/2010(UTC) Posts: 1
|
Originally Posted by: Palmer41420 The light comes on and the keypad works fine. When you press start,it starts counting down and the light stays on but the turntable does not spin and nothing else happens. It is silent. No blower or humming. I tried auto settings like "popcorn" and had the same result. I flipped the breaker off to try to reset it and nothing changed. Does anyone have any ideas? Check your door switches for continuity with the power disconnected and at least one terminal removed from the switch.
|
|
|
|
AppliancePartsPros.com
»
Appliance Repair Help
»
Microwave Repair
»
Keypad works and light comes on: turntable doesn't work and no hum or blower sound
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close