Whirpool Washer Will No Go To Rinse Cycle - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Whirpool Washer Will No Go To Rinse Cycle Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LSR5232LQ0	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

roperstopper		#1 Posted : Friday, September 7, 2012 7:07:09 AM(UTC)
Rank: Member Groups: Registered Joined: 9/7/2012(UTC) Posts: 2		I have a roper/whirlpool 4 cycle washer.It works great through all wash cycles,fills-aggitates,drains and spins,but will not start the rinse cycle on any of the wash options.Does not begin to fill,etc. Timer is silent-no noise-no nada. thanks


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Simon / APP Team		#2 Posted : Friday, September 7, 2012 8:18:54 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Most likely the rinse cycle is set for cold water only. Check if you are getting cold water to the washer, then check the water valve. If it's getting 120VAC to the solenoid - replace it Part number: 285805 Here are the breakdown diagrams and Replacement parts for Whirlpool LSR5232LQ0 WASHER - DIRECT DRIVE \| AppliancePartsPros.com Post the results. Simon.


User Profile View All Posts by User View Thanks

roperstopper		#3 Posted : Saturday, September 8, 2012 11:59:01 AM(UTC)
Rank: Member Groups: Registered Joined: 9/7/2012(UTC) Posts: 2		Thanks I'll Check Into It


User Profile View All Posts by User View Thanks

ancel1961		#4 Posted : Sunday, September 9, 2012 12:05:27 PM(UTC)
Rank: Member Groups: Registered Joined: 9/9/2012(UTC) Posts: 1		Thanks Simon / APP Team, You gave me the solution to the problem I was having with my washer You took a load off my shoulders Take care ;)


User Profile View All Posts by User View Thanks

Simon / APP Team		#5 Posted : Monday, September 10, 2012 8:54:55 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		You are welcome. Simon.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (5)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close