Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
adelavan  
#1 Posted : Thursday, September 6, 2012 9:22:48 AM(UTC)
adelavan

Rank: Member

Groups: Registered
Joined: 9/6/2012(UTC)
Posts: 1

Yesterday my dryer tripped a main circuit to home after my daughter started the dryer and now the panel does not light up or start. I reset the breaker to the home and there is power coming out of the outlet but no luck.

A few months ago I smelled burnt wire when I was drying a comforter and I've smelled it in the past and thought maybe the smell was from overloading the machine but it's meant to hold a comforter. I thought there was strain on belt.

The manual says it could be Thermal Limiter
Part Number: PS755806

But why does the control panel not light up?
Machine get lots of use and is 5-7 years
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Simon / APP Team  
#2 Posted : Thursday, September 6, 2012 10:11:08 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

Hi.

You should start with checking the thermal limiter

Part number: WE04X10094
Part number: WE04X10094


Located on daigr#1 #1236.

Check if there is continuity at the limiter.

No continuity - replace it.

Here are the breakdown diagrams and http://www.appliancepartspros.c...el.aspx?model_id=5219576

Post the results.

Simon.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.