Rank: Member
Groups: Registered
Joined: 8/8/2012(UTC)
Posts: 2
|
I have a Kenmore 70 series washer that won't drain. It does spin and agitate fine. I replaced the pump with a new one and checked all hoses for blockage? Any Idea what I can do next?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/8/2012(UTC)
Posts: 6
|
Perhaps the switch or relay that controls the drain valve is bad or has a bad connection. I'd try to find a schematic and start there.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/8/2012(UTC)
Posts: 2
|
Originally Posted by: ditosp  Perhaps the switch or relay that controls the drain valve is bad or has a bad connection. I'd try to find a schematic and start there. Found Schematic on Sears website no drain control parts that I can find goes straight from drum to pump to drain pipe?:confused:
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
